If you have steel cable, follow the below methods to attach the cable to the winch drum. Hold the rope tight to tighten up the slack for better tension.Remove the Allen screw and then lock the cable in place by tightening the Allen screw firmly.Pull the rope tight and make a final knot at the end of the slack.Use the slack and wrap 4 to 5 times around the drum.Feed the winch rope through the drum and underneath it.If your winch has this specification, ensure that your winch rope has a ring terminal at the end of the rope. Securing the end of the rope with an Allen head screw on the side of the winch drum. Once wrapped and installed, it keeps the rope securely in place.These wraps will not allow you to unroll under your pulling. Do at least 5 to 6 wraps before feeding it through the other loop of the grabber.Run the winch rope through one end of the grabber.If you have any eyelets or metal ends, remove them. Keep the end of the winch rope sealed to help to get it inside the loop with ease.First, attach the rope grabber to the drum.The Rope Grabber comes with a small loophole opening on either end of it.Grabber is a universal fit for all winch brands and allows a simple mounting solution without any mounting bolts for the cable. Rope Grabber is a winch line grabber with double-sided tape that attaches to the drum. If you have a synthetic rope, follow the below methods to attach the rope to the winch drum.
0 kommentar(er)
